Filter
Top Products
30
3.4 LAN
LAN Settings
Configure the gateway address of the Wireless Broadband Router. To dynamically
assign the IP address for client PCs, enable the DHCP Server, set the lease time, and then
specify the address range.
Valid IP addresses consist of four numbers, and are separated by periods. The first
three fields are the network portion, and can be from 0-255, while the last field is the host
portion and can be from 1-254.
IP address: This is the router’s LAN port IP address (Your LAN clients default gateway IP
address)
Subnet Mask: Specify a Subnet Mask for your LAN segment.
The Gateway acts as DHCP Server: You can enable or disable the DHCP server.
IP Pool Starting Address: Enter the first address that should be assigned by the DHCP