AEG PROTECT B. 2000 Power Supply User Manual


 
32
PROTECT B. 3000 / B. 3000 BP
For mounting the 3000 VA UPS in a 19” rack fix the mounting
ears to the UPS and install the unit to the rails. Do the same
for the optional battery module.
5.2 Additional battery installation setup
PROTECT B. 1500, 2000 und 3000 include external battery
ports that allow connecting additional battery modules. This
provides additional battery runtime.
Caution:
Connect the battery connectors quickly and
check for a tight fit of the connections.
PROTECT B. 1500 und B. 2000
There is one external battery port on the UPS and on the
battery pack.
1. Connect the battery cable to the external battery
port of the rear of UPS.
2. Then connect the supplied battery cable from
extended battery module to the external battery
port on the rear of the UPS.
If continuing to add up extended battery packs, repeat
above step.
100%
F
AULT
100%
50%75%
25%
75%50%
VOL
TAGE RANGE:
220V AC
230V
AC
240V AC
OVER LOAD
BAD BA
T.
PSDR F
AIL
25%
INPUT
TYPE:
NORMAL
LINE MODE
BAT. MODE
GENERA
TOR
WIDE RANGE
TEST
CNFG
ON / OFF
ENTER