6 Twist the internal DMM input cable.
Twist the internal
DMM input cable (labeled P101) at least one full turn
before plugging it into the backplane connector. If you do not twist the
cable as shown, certain specifications will be compromised.
7 Insert the DMM input cable into the backplane connector.
Insert the internal
DMM input cable into the backplane connector
as shown. Press firmly to ensure a good electrical connection.
8 Enable the internal DMM.
After installing the internal
DMM assembly, you must enable it for
operation. From the front-panel, select the
DMM ENABLED choice from
the Utility menu. From the remote interface, use the INST:DMM command.
3