Filter
Top Products
IV
Additional Safety Information
The following general safety precautions must be observed
during all phases of operation of this instrument.
Failure to comply with these precautions or with specific warn-
ings elsewhere in this manual violates safety standards of
design, manufacture, and intended use of the instrument. Agi-
lent Technologies, Inc. assumes no liability for the customer’s
failure to comply with these requirements.
This product is designed for use in compliance with:
• IEC 61010-1:2001/EN 61010-1:2001
• USA: UL61010-1:2004
• Canada: CSA C22.2 No. 61010-1:2004
For further information on safety, refer to the 82357B User’s
Guide.
CAUTIONCAUTION
• Use the device with the cables provided.
• Repair or service that is not covered in this manual
should only be performed by qualified personnels.
WARNING
• Do not use the device if it appears damaged or
defective.
• Observe all markings on the device before connecting
any wiring to the device.
• Do no operate the device in the presence of flammable
gases or fumes.
• Do no install substitute parts or perform any
unauthorized modification to the device.