Filter
Top Products
2-8
Operating the Instrument
Exercise 5. Modifying the Setup
Exercise 5. Modifying the Setup
The purpose of this exercise is to show you the Channel and Time Base
menus.
Changing the vertical scale
1
To display the Channel menu and change the vertical scaling, press:
Channel
(located on the plug-in module),
Scale
Change the scaling so the vertical height of the signal is about eight divisions,
using the knob, arrow keys or keypad.
Selecting Fine mode
When the knob and arrow keys are
not
in the Fine mode, they change the scal-
ing in a 1-2-5 sequence. You can change the scaling in 1 mV increments by
using the keypad, or by setting the knob and arrow keys to the Fine mode.
2
To set the instrument to the Fine mode, press:
Shift
,
Fine
The word
FINE
appears at the top-right corner of the display area when the
fine mode is activated.