Agilent Technologies DP105 Graphics Tablet User Manual


 
User Manual: Family of 8-bit Digitizers Page 53 of 66
Simulation Mode
Simulation mode allows you to run AcqirisLive without having any digitizer installed in the PC.
Temperature Update
The internally measured temperature of the currently selected module is normally displayed. Using this switch turns
this feature off.
Acquisition State
This switch turns on the display of the current acquisition state (Stopped, Ready, Started, Reading, Data ready). This
is helpful when running with time-consuming settings (e.g. many segments overlaid, many channels, large records,
etc.), but will slow down the overall performance.
Multi-instruments
By default, AcqirisLive tries to detect instruments connected through ASBus, and will initialize any connected
digitizers as a multi-instrument. This behavior can be inhibited by the -x switch, in which case any ASBus connector
will be ignored.