Filter
Top Products
22 U2781A User’s Guide
2 Installation
Installing the USB DAQ driver
1 Unpack the U2781A USB modular instrument chassis.
2 Insert the Product Reference CD- ROM into the CD- ROM drive.
3 Installer will automatically execute the Agilent U2300 Series
Installation Menu. Click Hardware Driver to begin the installation of
USB DAQ driver.
Figure 2-1
4 If it does not auto execute, go to Start > Run (on the Windows Start
menu) and type <drive>:\Driver\Hardware\setup_hw.exe,
where <drive> is your CD- ROM drive. Click OK to begin installation.