Filter
Top Products
Installation 2
U2781A User’s Guide 25
Hardware Verification
To verify that the hardware plugged in and installed is connected
properly, run the Agilent Connection Expert to do the hardware
verification
Agilent Connection Expert is one of the utility files in the Agilent IO
Libraries. The Connection Expert configures connected instruments
and enables communication. Connection Expert will automatically
detect the USB instruments when connected. To begin, Click Start > All
Programs > Agilent IO Libraries Suite > Agilent Connection Expert. The
connected devices will be visible in this application.
Agilent Measurement Manager Software Installation
NOTE
• Verify that your PC meets the minimum requirements as stated in Hardware
Requirements.
• You do not need to install the Agilent Measurement Manager software again if
you have previously purchased and installed the U2300A series USB DAQ.