Filter
Top Products
53
Chapter 4. WDS Mode Configuration
Please refer to illustrations of the section 1.3 for possible applications in the WDS mode. This section provides detailed
explanation for users to configure in the WDS mode with help of illustrations. In the WDS mode, functions listed in the table
below are also available from the Web-based GUI interface.
Option System Wireless Utilities Status
Operating Mode General Settings Management System Overview
LAN Advanced Settings Profiles Settings WDS Status
Time Server WDS Setup Firmware Upgrade Extra Info
SNMP Network Utility Event Log
Functions
UPnP Reboot
Table 4-1: WDS Mode Functions
4.1 External Network Connection
4.1.1 Network Requirement
You could expand your Ethernet network via WDS link. In this mode, the APO1000/APO1010 connects directly to a wired
LAN, and wirelessly bridges to a remote access point via a WDS link as shown in Figure 4-1. In the mode, it can’t associate
with any wireless clients.
F
i
g
u
r
e
4-1 Point to Point Configuration
APO1000/APO1010