Filter
Top Products
40
Parameters Default Description
Encryption You can choose Disable, WEP, WPA pre-share key,
WPA RADIUS for encryption mode. The detailed
settings will appear after you choose an encryption.
See 3.2.2.1 to 3.2.2.3 for each encryption type.
Enable 802.1x Authentication IEEE 802.1x is an authentication protocol. Every user
must use a valid account to login to this Access Point
before accessing the wireless LAN. The authentication is
processed by a RADIUS server. Check this box to
authenticates user by IEEE 802.1x.
After you finish with all security settings, please click “Apply” button.
If you want to reset all settings in this page, please click “Cancel” button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup procedures,
or click “Apply” to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).