Filter
Top Products
6
• Fast Ethernet: 2-pair UTP Cat. 5, Twisted Pair (UTP)
Ports
• 24 x 10/100Mbps TX Auto-Negotiation RJ45 Port
Access Method
• CSMA/CD
Transmission Method
• Store and Forward
MAC Address Table
• 8K
Built-in Buffer
• 1.25M bits
Data Transfer Rate**
• Ethernet: 10/20Mbps – Half/Full-Duplex
• Fast Ethernet: 100/200Mbps – Half/Full Duplex
Physical and Environmental
• Power Input: 100~240V AC, 50~60Hz
• Operation Temperature: 0 °C ~ 50°C
• Storage Temperature: -20°C ~ 70°C
• Humidity: 5% ~ 90% RH, non-condensing
7
2 Installing the Switch
The site where you place the switch may greatly affect its
performance. When installing, take the following into your
consideration.
2.1 Installation
Follow the guidelines below to install the Switch:
Install the Switch in a fairly cool and dry place. See the
Technical Specifications for the acceptable temperature and
humidity operating ranges. Install the Switch on a sturdy,
level surface that can support its weight. Connect the power
cord to the Switch and the power outlet. The distance is no
more than 182cm.
Leave at least 10cm (about 4 inches) of space at the front
and rear of the Switch for ventilation.
2.2 Desktop or Shelf Installation
When installing the Switch on the desktop or shelf, please
attach the rubber feet to the Switch. Peel off the protective
paper on the pads and attach them on the bottom of the
Switch (one at each corner).
2.3 Rack Installation
The Switch is rack-mountable and can be installed on an EIA