Filter
Top Products
What you need
Wiring procedure
1 Speed Touch Installation Guide
16 / 104
3EC 36228 AAAA TCZZA Ed. 01
1.2.1 AST350i Wiring
The appropriate DSL service must be available at your local
premisses:
" ADSL service must be enabled on your ISDN telephone line.
" As both telephone and ADSL service are simultaneously
available from the same copper pair, you need a central
splitter or distributed filters for decoupling ADSL and
telephone signals.
Contact your SP for more information.
To use the Ethernet port you need at least:
" One PC with an Ethernet 10BaseĆT PCĆNetwork Interface
Card (NIC) installed
" For local networking, a 10BaseĆT hub and the necessary
connection cables.
Proceed as follows:
1. Use the included LAN cable to wire your PC's Ethernet port to
AST350i's Ethernet interface.
2. Use the included DSL cable to wire the AST350i's Line port to
your DSL wall outlet.
3. Plug the adapter's coaxial jack into the AST350i's receptacle
marked 'DC'.
Note: Firstly check whether the included mains adapter suits the local
power specifications. If you are not sure of the regional power conditions,
check the adapter's specifications in section B.2 and contact your local
power company.