Filter
Top Products
MDI vs. MDIĆX hub
ports and the AST350i
1 Speed Touch Installation Guide
18 / 104
3EC 36228 AAAA TCZZA Ed. 01
In the above figure an MDIĆX port on the hub connects to the
AST350i. Therefore, a crossover LAN cable is used.
Note: In case the hub's uplink" port is used to wire the AST350i you can use
the included straightĆthrough LAN cable.
Cascading Repeating Hubs
You may cascade up to four repeating hubs in your LAN
(limitations of Repeating Ethernet V2.0/IEEE802.3 hubs). In case
more hubs need to be cascaded, you must use switching hubs.
10BaseĆT Half Duplex Interfacing
Make sure the 10BaseĆT port(s) of your PC(s) are configured for
either Auto Negotiation or Half Duplex.
Never configure the 10BaseĆT Ports for FullĆDuplex !
CAUTION
CAUTION