Filter
Top Products
www.aleratec.com
37
Using the 1:5 HDD Cruiser
Main Menu
Adv Setup
AdvSetup:ReadErrorSkip
This function can be enabled to ignore any error that occurs during copying. By
default, the 1:5 HDD Cruiser will halt the copy operation when it encounters
an unreadable area of the source hard disk and display an error. Enabling this
option will ignore any bad sectors on the source hard drive by skipping over
them.
Warning: Setting this function to “On” may result in corrupt data on
copied hard drives.
1. Press and hold ESC for about 3 seconds to access the “Adv Setup” menu.
The following screen will be displayed.
2. Use the arrow buttons (or) to scroll to “Read Error Skip”. The
following screen will be displayed.
3. Press ENT to display the current conguration setting. The default setting
is “Off”.
4. Press the arrow buttons (or) to toggle the option “On” or “Off”. After
changing a setting, remember to press ENT to save it.
ENT ESC
11. Adv Setup
ENT ESC
Read Error Skip
Off
ENT ESC
11-01. Adv Setup
Read Error Skip