Filter
Top Products
www.aleratec.com
16
HDD Duplicator
1-1 ver:
UP
DOWN
ENT
ESC
POWER
HDD Duplicator
1-1 ver:
UP
DOWN
ENT
ESC
POWER
HDD Duplicator
1-1 ver:
UP
DOWN
ENT
ESC
POWER
Using the HDD Copy Dock Duplicator
Advanced Setup
Advanced Setup Menu: 7-1 Read Error Skip
This function can be enabled to ignore any error that occurs during copying.
By default, the HDD Copy Dock Duplicator will halt the copy operation when
it encounters an unreadable area of the source hard disk and display an error.
Enabling this option will ignore any bad sectors on the source hard drive by
skipping over them.
Warning: Setting this function to “On” may result in corrupt data on copied hard
drives.
1. Use the arrow buttons to scroll to “Advanced Setup”. The following
screen will be displayed:
2. Use the arrow buttons to scroll to “Read Error Skip”. The following screen
will be displayed:
3. Press ENT to display the current conguration setting. The default setting
is “Off”.
Press the arrow buttons to toggle the option to “Disable” or “Enable”.
After changing a setting, remember to press ENT to save it.
Note: This setting will only apply for the current job. If desired, it will need to
be set again for subsequent jobs.
7. Advanced Setup
7. Advanced Setup
7-1. Read Err Skip
Read Error Skip
Off