Filter
Top Products
21
Configure DEV3:
1. Access the web server (http://192.168.2.254) of device from the Ethernet port.
Caution
If you configure multiple devices in the same PC, since the devices have the
same default IP address but different MAC addresses, it may cause you
can’t access the web server of device. If the situation happens, please try to
clean the ARP table of your PC by DOS command “arp –d” then you can
access the web server of device using the default IP address.
2. Use “LAN Interface” page to set the IP address of LAN interface and disable DHCP
server.
3. Wait for refreshing web page.
4. Access the web server by new IP address “192.168.2.203” then use “Basic Settings”
page to change SSID and CHANNEL.