Filter
Top Products
46
Description Entries of WDS AP List
Spanning Tree
Protocol Required
Access Point The MAC Address of Repeater Yes
Repeater The MAC Address of Access Point Yes
Wireless Bridge
Wireless Bridge can establish a wireless connection between two or more
Wired LANs. When you decide to use the WDS as a Wireless Bridge, please
refer the following instructions for configuration.
z In AP mode, enable the WDS function.
z You must set these connected devices with the same radio channel, but
you may use different SSID.
z Choose “WDS” mode for only wireless backbone extension purpose.
z You can use any network topology, please refer the WDS topology
section.