Filter
Top Products
Replacing the Display Hinges | 104
Replacing the Display Hinges
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1 Route the display cable, display-light board cable, and antenna cable through the
routing guides on the display hinges.
2 Align the screw holes on the display hinges with the screw holes on the display
back-cover.
3 Replace the screws that secure the display hinges to the display back-cover.
Postrequisites
1 Replace the display bezel. See "Replacing the Display Bezel" on page 101.
2 Replace the display assembly. See "Replacing the Display Assembly" on page 98.
3 Follow step 5 to step 9 in "Replacing the Palm Rest" on page 49.
4 Replace the video card. See "Replacing the Video Card" on page 44.
5 Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
6 Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
7 Replace the processor fan. See "Replacing the Processor Fan" on page 35.
8 Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
9 Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
10 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
11 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
12 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
13 Replace the battery. See "Replacing the Battery" on page 17.
14 Replace the base cover. See "Replacing the Base Cover" on page 15.
book.book Page 104 Friday, June 28, 2013 3:27 PM