Filter
Top Products
AT-FS705LE Installation Guide
15
Note
For wall-mount installation, you must
supply the two screws and plastic
anchors or other material necessary to
physically mount the switch to the wall.
3. Install two plastic anchors and two pan-head
screws into the wall, separated by 5
centimeters (approximately 2 inches).
4. Position the switch onto the wall screws.
5. Plug the power adapter into the power
receptacle, then plug the DC power cord into
the DC connector on the front panel of the
switch.
Warning
The power cord is used as a
disconnection device. To de-energize
equipment, disconnect the power cord.
5
6. Connect the data cables to the ports on the
switch.
7. Attach the data cables to the switch ports. Do
not use a cross-over cable to connect
workstations or servers to ports 1 through 5.