AT-FS705LE Installation Guide
17
❑ Check to be sure that the power outlet has
power by connecting another device to it.
❑ Try replacing the power adapter with
another power adapter.
2. Check the Link/Act LED for each port. The
LED should be lit steady or flashing. If a
Link/Act LED is OFF, check the following:
❑ Check to be sure that the node connected
to the port on the switch is powered ON. If
the node is OFF, power the unit ON.
❑ Check to be sure that the distance
between the switch and the connected
network device is no greater than 100
meters (328 feet).
❑ Check to be sure that you are using
Category 5 cable.
❑ Check to be sure that the cable has not
been cut or damaged.
3. If the Lnk/Act LED for a port is on but there
is a communication problem to the end node
connected to the port, such as the loss of data,
check the following:
❑ Check to be sure that the distance
between the switch and the connected
network device is no greater than 100
meters (328 feet).