Filter
Top Products
1
Chapter 1
Overview
The AT-FS705E FC Series and the AT-FS706E FC Series Fast Ethernet
switches are unmanaged Layer 2 switches. They can be used in a variety of
network configurations and topologies. You can use the switches to create
small workgroups with dedicated 10/100 Mbps links to your network devices,
such as workstations, servers, printers, and routers. You can also use the
switches to interconnect Ethernet hubs to provide a bridge between the
different workgroups of your network. Finally, you can connect the switches to
other Ethernet switches so that they can be part of a larger Ethernet network.
Common features of the switches include:
Four 10/100 Mbps (10Base-T / 100Base-TX) twisted pair ports with
RJ-45 connectors
One (AT-FS705E FC) or two (AT-FS706E FC) 100 Mbps fiber optic
ports with a maximum operating distance of 2 kilometers (1.25 miles)
Full- or half-duplex operation on both the twisted pair ports and the
fiber optic ports
Automatic MDI/MDI-X configuration on the twisted pair ports
Store and forward Ethernet packet handling
MAC address table with a capacity of 4,000 addresses
The AT-FS705E FC Series and the AT-FS706E FC Series Fast Ethernet
switches are easy to operate. They require no software management.
The switches are available with a variety of fiber optic connectors. For a
complete list of the available models, contact your Allied Telesyn
International sales representative.
Note
The AT-FS705E FC Series and the AT-FS706E FC Series switches are
functionally identical. The only difference is the addition of the second
fiber optic port on the AT-FS706E FC Series switch.