Filter
Top Products
AT-GS900/16, AT-GS900/24 Gigabit eco-friendly Ethernet Switch Installation Guide
31
Unpacking the Switch
To unpack an AT-GS900/16 or an AT-GS900/24 switch, perform the
following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the switch on a level, secure surface.
3. Ensure the following hardware components are included in your switch
package. If any item is missing or damaged, contact your Allied Telesis
sales representative for assistance.
One AT-GS900/16 or AT-GS900/24 Fanless Gigabit Ethernet
switch
Two rack/wall mounting brackets
Eight flathead Phillips screws for mounting brackets to the switch
Four screws and anchors for attaching the switch to the wall
Four screws for attaching the switch to the rack
Four self-adhesive rubber feet
AC power cord