Filter
Top Products
Chapter 5: Installing the AT-SBx31CFC Card and Ethernet Line Cards
116
Figure 72. Removing the Battery Insulator
5. Align the edges of the AT-SBx31CFC Management Fabric Card with
the internal chassis card guides in slot 4 or 5 of the AT-SBx3112
Chassis. Figure 73 shows the AT-SBx31CFC Card aligned in slot 4.
Figure 73. Aligning the AT-SBx31CFC Card in the Chassis Slot
6. Insert the card into the slot until you feel it make contact with the
connector on the chassis backplane, as shown in Figure 74 on page
117.