Filter
Top Products
SwitchBlade x3112 Installation Guide
117
Figure 74. Inserting the AT-SBx31CFC Card in the Chassis Slot
Caution
Forcing the AT-SBx31CFC Card into its chassis slot when it is not
properly aligned with the card guides may damage the backplane
connector pins inside the chassis. If there is undue resistance,
remove the card. Check to be sure that it is properly aligned with the
card guides when sliding it into the chassis.
7. Secure the control card to the chassis by closing the two locking levers
on the front panel of the card, as shown in Figure 75 on page 118.