Filter
Top Products
Chapter 6: Installing the Transceivers and Cabling the Ports
148
3. Orient the transceiver with the handle on top, as shown in Figure 104.
Figure 104. Handle on the XFP Transceiver
4. Slide it into the slot until it clicks into place, as shown in Figure 105.
Figure 105. Installing an XFP Transceiver in the AT-SBx31XZ4 Line Card
Note
If you are ready to attach the fiber optic cable to the transceiver,
continue with the next step. Otherwise, repeat steps 1 to 4 to install
the remaining XFP transceivers.
Handle