Filter
Top Products
Page 12 | How To: Configure the WLAN with QoS alliedtelesis.com
[Bridge0] station role: root bridge
Assign the static IP address:
Configure the station role, the SSID and WMM to the radio interface 0 for bridging:
AT-WR4600(config)#interface dot11radio 0
AT-WR4600(config-if)#protocol-family an
AT-WR4600(config-if)#station-role root bridge
AT-WR4600(config-if)#ssid ATIopen
AT-WR4600(config-if)#bridge-group 1
AT-WR4600(config-if)#traffic-class voice cw-min 2 cw-max 4
fixed-slot 2
AT-WR4600(config-if)#traffic-class best-effort cw-min 4 cw-max 10
fixed-slot 3
AT-WR4600(config-if)#no shutdown
AT-WR4600(config-if)#end
AT-WR4600(config)#interface vlan1.1
AT-WR4600(config-if)#no ip address dhcp
AT-WR4600(config-if)#ip address 10.0.0.100/24
AT-WR4600(config-if)#exit