Filter
Top Products
Page 8 | How To: Configure the WLAN with QoS alliedtelesis.com
Connecting AT-WR4600 products
There are two options for accessing the Command Line Interface of the devices:
SSH remote shell, using any text-mode SSH client software.
RS-232 Line Driver/Receiver that provides a standard DTE console interface;
note, this is optional and is not always available.
Accessing the device via SSH
The Secure Shell (SSH) is an encrypted networking protocol, allowing the user to
configure the device through an Ethernet network. Microsoft does not supply SSH
tool. You can use an alternative program such as Tera Term Pro, which is
licensed under GPL2. The device is factory configured with the static IP address
192.168.1.1. If the device is receiving an address from a DHCP server, please
check the assigned IP address.
Accessing the device via RS-232
To access the device, you can use either the build-in Microsoft HyperTerminal
(note it was removed from Windows Vista and later versions) or an alternative
program such as Tera Term Pro.
The settings of the serial terminal are as follows.
Transmission rate
115200bps
Data length
8 bit
Stop bit
1bit
Parity
None
Flow control
None