Allied Telesis AT-X210-16GT Switch User Manual


 
i
Electrical Safety and Emissions Standards
This product meets the following standards.
RFI Emissions EN 55022:2010
EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-3:2008
EN 62233:2008
EN 62311:2008
FCC Class A
FCC Part 15 (47 CFR 15)
ICES-003
VCCI-A
VCCI-B
2004/108/EC EMC Directive
Environmental 2011/65/EU RoHS Directive
Compliance
Electrical Safety C-TICK
CE
2006/95/EC Low Voltage Directive
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
IEC 60950-1 (ed.2)
UL 60950 (
C
UL
US
)
Immunity EN 55024:2010
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate
this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Warning: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Laser Safety EN 60825-1:2007