Filter
Top Products
WLBARGS Manual
36 37
36 37
(1) Enter the pc name and select network connection type.
(2) Configure the mac address data.
(3) Click [Add PC Data] to complete the setting.
<Wireless setting/802.11g/b setting>
ESSID Default ESSID is [corega].
Mode . 802.11b/g: auto connect in either 802.11b or 802.11g.
. 802.11g: connect in 802.11g (54Mbps) mode.
Channel When there is interruption, other channels can be
selected.
SuperG mode If your Wireless LAN Card supports Super G Mode
transmit rate. You can use this function to increase
wireless throughput.
eXtended
Range(XR)
When it's enabled, it can extend the transmition
range, however, it may also decrease the datarate.
Transfer rate Select date rate. Default is [Auto setting].
Hidden AP when it's enabled, ESSID will not be seen in the
network.
Transmit power It is for adjusting the transmit power.
<Wireless setting/802.11g/b security setting>
This section contains WEP,WAP-PSK, WPA2-PSK, WPA-EAP and WPA2-EAP
encryption setting, please refer to Chapter 5 to get detail information.