Filter
Top Products
GSM Series User Manual
7
Alloy Computer Products Pty Ltd Copyright ©2006
1.4.2. User Interfaces on the Rear Panel
1.5. Overview of the Optional SFP Modules
With the GSM-16T2SFP switch, the SFP ports are paired with RJ-45 copper ports 15 and 16. In
the case of the GSM-24T2SFP, the SFP ports are paired with RJ-45 copper ports 23 and 24.
Only one of any given paired port can be used. In this manner, these paired ports can be seen as
‘Dual Media’ ports that support 10/100/1000Mbps or 1000Mbps fibre via the SFP interfaces.
Unlike the GSM-8T16SFP which has 16 independent SFP ports which could be used as a central
gigabit fibre distribution point.
Optional 1000Mbps mini-GBIC fibre transceiver modules can be used for high-speed uplink
connections to fibre backbones or servers, when installed in the SFP ports. A range of optional
Alloy mini-GBIC modules are available:
Alloy Part No. Description
MGBIC-T 1000Mbps, mini-GBIC, Copper, 100metres
MGBIC-MLC 1000Mbps multimode 1000Base-SX, 850nm, max. range 500m
MGBIC-SLC10 1000Mbps single-mode 1000Base-LX, 1310nm, max. range 10Km
MGBIC-SLC4013 1000Mbps single-mode 1000Base-LHX, 1310nm, max. range 40Km
MGBIC-SLC4015 1000Mbps single-mode 1000Base-LHX, 1550nm, max. range 40Km
MGBIC-SLC70 1000Mbps single-mode 1000Base-ZX, 1550nm, max. range 70Km
MGBIC-SLC100 1000Mbps single-mode 1000Base-EZX, 1550nm, max. range 100Km
MGBIC-WDMS3.20 1000Mbps WDM single-mode/single-fibre 1310nm, max. range 20Km
MGBIC-WDMS5.20 1000Mbps WDM single-mode/single-fibre 1550nm, max. range 20Km
Fi
g
. 1-5: Rear View of the GSM-16T2SFP
AC
Lin
e
1
00
-24
0
V
50/60
Hz
AC mains cable locking clamp
RS-232 DB-9 Serial Port