Filter
Top Products
GSM Series User Manual
142
Alloy Computer Products Pty Ltd Copyright ©2006
enable egress-rate
Syntax:
enable egress-rate <range> <data_rate>
Description:
Used to set up the Egress-rate of each port on the switch.
Argument:
<range>:syntax 1, 5-7, available from 1 to 16 (GSM-16T2SFP), 1 – 24 (GSM-24T2SFP, GSM-
8T16SFP).
<data_rate>: 0-1000Mbps.
Possible value:
<range>: 1 to 16 (GSM-16T2SFP), 1 to 24 (GSM-24T2SFP, GSM-8T16SFP).
<data_rate>: 0-1000Mbps.
Example:
GSM-16T2SFP(bandwidth)# enable egress-rate 1-16 200.
: Enables an Egress rate of 200Mbps on all 16 ports.
disable ingress-rate
Syntax:
disable ingress-rate <range>
Description:
Used to disable the Ingress-rate of the port.
Argument:
<range>:syntax 1,5-7, available from 1 to 16 (GSM-16T2SFP), 1 – 24 (GSM-24T2SFP, GSM-
8T16SFP).
Possible value:
<range>: 1 to 16 (GSM-16T2SFP), 1 to 24 (GSM-24T2SFP, GSM-8T16SFP).
Example:
GSM-16T2SFP(bandwidth)# disable ingress-rate 1-16
: Disables the Ingress rate control for all ports from 1 through to 16.