Filter
Top Products
MULTI-TASKER
10
This command selects the Vertical Position
adjustment and makes it the active control. It
also returns the status of the current Vertical
Position. As the active control, it may be
adjusted using the [ + ] and [ - ] commands.
Command Format: [VPOSCiUy]
Ci = card ID (i = slot number)
Uy = unit id (i = 0 to 9) (refer to the MT100-100
user’s guide for explanation)
Example:
There is an MT106-101 in slot 2 of unit ID 3.
View the current Vertical Position and adjust the
image for the best vertical position.
[VPOSC2U3] 10
[VPOSC2U3] = STATUS/Current value
10 = Feedback of current value
[ + ] & [ - ] = Adjust as required
11. [HSIZEnCi] - Set Value
This command sets the Horizontal Size to an
absolute value and makes the Horizontal Size
adjustment the active control.
Command Format: [HSIZEnCiUy]
n = a value from 0 to 20 (Default = 19)
Ci = card ID (i = slot number)
Uy = unit id (i = 0 to 9) (refer to the MT100-100
user’s guide for explanation)
Example:
There is an MT106-101 in slot 2 of unit ID 3.
Set the Horizontal Size to the value of 12 by
sending the command [HSIZE12C2U3].
12. [HSIZECi] - Status/Adjust
This command selects the Horizontal Size
adjustment and makes it the active control. It
also returns the status of the current Horizontal
Size. As the active control, it may be adjusted
using the [ + ] and [ - ] commands.
Command Format: [HSIZECiUy]
Ci = card ID (i = slot number)
Uy = unit id (i = 0 to 9) (refer to the MT100-100
user’s guide for explanation)
Example:
There is an MT106-101 in slot 2 of unit ID 3.
View the current Horizontal Size and adjust the
image to the center of the screen.
[HSIZEC2U3] 10
[HSIZEC2U3] = STATUS/Current value
10 = Feedback of current value
[ + ] & [ - ] = Adjust as required
13. [VSIZEnCi] - Set Value
This command sets the Vertical Size to an
absolute value and makes the Vertical Size
adjustment the active control.
Command Format: [VSIZEnCiUy]
n = a value from 0 to 20 (Default = 19)
Ci = card ID (i = slot number)
Uy = unit id (i = 0 to 9) (refer to the MT100-100
user’s guide for explanation)
Example:
There is an MT106-101 in slot 1 of unit ID 1.
Set the Vertical Size to the value of 6 by
sending the command [VSIZE6C1U1].
14. [VSIZECi] - Status/Adjust
This command selects the Vertical Size
adjustment and makes it the active control. It
also returns the status of the current Vertical
Size. As the active control, it may be adjusted
using the [ + ] and [ - ] commands.
Command Format: [VSIZECiUy]
Ci = card ID (i = slot number)
Uy = unit id (i = 0 to 9) (refer to the MT100-100
user’s guide for explanation)
Example:
There is an MT106-101 in slot 2 of unit ID 3.
View the current Vertical Size and adjust the
vertical size for the best fit.
[VSIZEC2U3] 10
[VSIZEC2U3] = STATUS/Current value
10 = Feedback of current value
[ + ] & [ - ] = Adjust as required