Filter
Top Products
MULTI-TASKER
12
20. [COLORCi] - Status/Adjust
The COLOR command, with no value, selects
the Color adjustment and makes it the active
control. It is also used to return the status of the
current Color level. As the active control, it may
be adjusted using the [ + ] and [ - ] commands.
Command Format: [COLORCiUy]
Ci = card ID (i = slot number)
Uy = unit id (i = 0 to 9) (refer to the MT100-100
user’s guide for explanation)
Example:
There is an MT106-101 in slot 2 of unit ID 3.
View the current Color level and adjust the color
for the best possible picture.
[COLORC2U3] 2
[COLORC2U3] = STATUS/Current value
2 = Feedback of current value
[ + ] & [ - ] = Adjust as required
21. [HUE] - Set Value
This command sets the Hue to an absolute
value. It also makes the Hue adjustment the
active control.
Command Format: [HUEnCiUy]
n = a value from 0 to 10 (Default = 10)
Ci = card ID (i = slot number)
Uy = unit id (i = 0 to 9) (refer to the MT100-100
user’s guide for explanation)
Example:
An MT106-101 is in slot 4 of unit ID 2. Set the
Hue to the value of 7 by sending the command
[HUE7C4U2].
22. [HUE] - Status/Adjust
This command selects the Hue adjustment and
makes it the active control. It is also used to
return the value of the current Hue level. As the
active control, it may be adjusted using the [ + ]
and [ - ] commands.
Command Format: [HUECiUy]
Ci = card ID (i = slot number)
Uy = unit id (i = 0 to 9) (refer to the MT100-100
user’s guide for explanation)
Example:
There is an MT106-101 in slot 2 of unit ID 3.
View the current Hue and set the hue for a good
image.
[HUEC2U3] 2
[HUEC2U3] = STATUS/Current value
2 = Feedback of current value
[ + ] & [ - ] = Adjust as required
23. [HELP]
In MTSetup.exe, this command displays a list of
the commands available for the MT106-101
along with a brief description.
Command Format: [HELPCiUy]
Ci = card ID (i = slot number)
Uy = unit id (i = 0 to 9) (refer to the MT100-
100 user’s guide for explanation)
24. [WR]
This command groups multiple cards in the
Enclosure. Each unit contains a maximum of
nine groups.
Command Format: [WRCn…GkUi]
Cn = card ID No. (n = slot # from 1 to 19)
(1-8 for MT100-101 or 1-4 for MT100-106)
Gk = group number (k = # from 1-9)
Ui = unit number (i = # from 0-9)
Example:
To group cards #1, 2, and 3 as group 5 of unit
#1, send the command [WRC1C2C3G5U1].
After executing this command, cards 1, 2 and 3
will be grouped together as group 5 of unit 1.