Altinex MT107-305 Switch User Manual


 
MULTI-TASKER™
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using
your MT107-301/305/306. Keep this manual handy
for future reference. These safety instructions are
to ensure the long life of your MT107-301/305/306
and to prevent fire and shock hazard. Please read
them carefully and heed all warnings.
1.1 GENERAL
Qualified ALTINEX service personnel, or their
authorized representatives must perform all
service.
1.2 INSTALLATION
To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the
MT107-301/305/306 in direct sunlight, near
heaters or heat radiating appliances, or near
any liquid. Exposure to direct sunlight, smoke,
or steam can harm internal components.
Handle the MT107-301/305/306 carefully.
Dropping or jarring can damage the card.
Do not pull the cables that are attached to the
MT107-301/305/306.
Insert the card carefully into the slots of the
Multi-Tasker™ without bending any edges.
1.3 CLEANING
Clean only the connector area with a dry cloth.
Never use strong detergents or solvents, such
as alcohol or thinner. Do not use a wet cloth or
water to clean the card. Do not clean or touch
any component or PCB.
1.4 FCC / CE NOTICE
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.