Filter
Top Products
SWITCHERS
11
ACCESSORIES 8
Model No. Description
TABLE MOUNT HARDWARE
TM1276
Table Mount bracket for 2U ½ Rack-
Wide
RACK MOUNTING ACCESSORIES
DA1298RM
Rack mount shelf for two units side by
side
DA1299RM
Rack mount kit for single unit.
CONTROL CABLES
RC5204CC
Analog to contact Closure Adapter 6 ft
RC5207CC
RS-232/Master-Slave Control cable
HIGH RESOLUTION 4 BNC to 4 BNC
COAXIAL CABLE
CB4100MR
Bulk Cable 4 coaxes (500ft minimum)
CB4103MR
3 feet, 4 BNC to 4 BNC coaxial cable
CB4106MR
6 feet, 4 BNC to 4 BNC coaxial cable
CB4112MR
12 feet, 4 BNC to 4 BNC coaxial cable
CB4125MR
25 feet, 4 BNC to 4 BNC coaxial cable
CB4150MR
50 feet, 4 BNC to 4 BNC coaxial cable
CB4175MR
75 feet, 4 BNC to 4 BNC coaxial cable
CB41100MR
100 feet, 4 BNC to 4 BNC coaxial cable
CB41150MR
150 feet, 4 BNC to 4 BNC coaxial cable
SUPER HIGH RESOLUTION 4 BNC to
4 BNC COAX
CB4300MR
Bulk Cable 4 coaxes (500ft minimum)
CB4306MR
6 feet, 4 BNC to 4 BNC coaxial cable
CB4312MR
12 feet, 4 BNC to 4 BNC coaxial cable
CB4325MR
25 feet, 4 BNC to 4 BNC coaxial cable
CB4350MR
50 feet, 4 BNC to 4 BNC coaxial cable
CB4375MR
75 feet, 4 BNC to 4 BNC coaxial cable
CB43100MR
100 feet, 4 BNC to 4 BNC coaxial cable
CB43150MR
150 feet, 4 BNC to 4 BNC coaxial cable
POWER CABLES
PC5301US
Power cable for US
PC5302US
Power cable for U.K.
PC5303US
Power cable for Australia
PC5304US
Power cable for Germany
FREQUENTLY ASKED QUESTIONS 9
No: Question Answer
1 When I
press F1
nothing
happens.
What is a
purpose of
this
function?
The F1 function is reserved for
future use. It does not perform
any functions at the present
time.
2 What is the
LED next to
the F1
button used
for?
This LED is also reserved for
future use. It is currently non-
operational.
3 When I
press the
RESET
button, the
switcher
does not
respond.
Why?
You must press and hold the
button for approximately 2
seconds, until you hear a
beeping sound and all of the
LED lights flash. This is
designed to avoid accidental
resetting.
4 Can the
MX2216RM
be rack
mounted?
The MX2216RM can be rack
mounted as a single unit or
two units side by side. The
width of the unit is 1/2 rack
wide. Altinex offers rack mount
ears for single unit mounting
(part# DA1299RM) and rack
shelf for mounting two units
(part# DA1298RM).
5 Can the
MX2216RM
be used to
pass
Composite
Video, S-
Video or
Component
Video?
Yes. Simply use the
corresponding channels to
pass the signals (e.g. For
composite video, you may use
the Red input channel and the
Red output channel, or you
can use the Blue input channel
and Blue output channel).
Since the MX2216RM is a
relay switcher, it can be used
as a contact closure control or
to switch virtually any type of
video signal.
6 Can the
MX2216RM
Yes, the MX2216RM uses a
universal internal power