Filter
Top Products
SWITCHERS
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
MX2216RM Switcher. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your MX2216RM and to
prevent fire and shock hazard. Please read them
carefully and heed all warnings.
1.1 GENERAL
• Unauthorized personnel shall not open the unit
since there are high-voltage components
inside.
• Qualified Altinex service personnel, or their
authorized representatives must perform all
service.
1.2 SAFETY GUIDELINES FOR THE RACK-
MOUNTING OF THE MX2216RM
• Maximum operating ambient temperature is 35
(degrees C).
• Never restrict the air flow through the devices’
fan or vents.
• When installing equipment into a rack,
distribute the units evenly. Otherwise,
hazardous conditions may be created by an
uneven weight distribution.
• Connect the unit to a properly rated supply
circuit.
• Reliable Earthing (Grounding) of Rack-Mounted
Equipment should be maintained.
1.3 INSTALLATION
• For best results, place the MX2216RM
Switcher on a flat, level surface in a dry area
away from dust and moisture.
• To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the
MX2216RM Switcher in direct sunlight, near
heaters or heat radiating appliances, or near
any liquid. Exposure to direct sunlight, smoke,
or steam can harm internal components.
• Handle the MX2216RM Switcher carefully.
Dropping or jarring can damage internal
components.
• Do not place heavy objects on top of the
MX2216RM. If the MX2216RM is mounted to a
table or wall, use only Altinex made mounting
accessories such as rack mount shelf
DA1298RM or rack mount ears DA1299RM
and cables for optimum setup.
• To turn off the main power, be sure to remove
the cord from the power outlet. The power
outlet socket should be installed as near to the
equipment as possible, and should be easily
accessible.
• Do not pull the power cord or any cable that is
attached to the MX2216RM Switcher.
• If the MX2216RM Switcher is not used for an
extended period, disconnect the power cord
from the power outlet.
1.4 CLEANING
• Unplug the MX2216RM’s power cord before
cleaning. Clean surfaces with a dry cloth. Never
use strong detergents or solvents such as
alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
1.5 FCC / CE NOTICE
• This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
• This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may