Filter
Top Products
SWITCHERS
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
MX4206RM
Switcher. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your
MX2406RM
and to
prevent fire and shock hazard. Please read them
carefully and heed all warnings.
1.1 GENERAL
•
Unauthorized personnel shall not open the unit
since there are high-voltage components inside.
•
Qualified ALTINEX service personnel, or their
authorized representatives must perform all
service.
1.2 SAFETY GUIDELINES FOR THE RACK-
MOUNTING OF THE MX2416RM
•
Maximum operating ambient temperature is 35
(degrees C).
•
Never restrict the airflow through the device’s
fan or vents.
•
When installing equipment into a rack, distribute
the units evenly. Otherwise, hazardous
conditions may be created by an uneven weight
distribution.
•
Connect the unit to a properly rated supply
circuit.
•
Reliable Earthing (Grounding) of Rack-Mounted
Equipment should be maintained.
1.3 INSTALLATION
•
For best results, place the
MX2406RM
Switcher
on a flat, level surface in a dry area away from
dust and moisture.
•
To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the
MX2406RM
Switcher in direct sunlight, near heaters or heat
radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke or steam can
harm internal components.
•
Handle the
MX2406RM
Switcher carefully.
Dropping or jarring can damage internal
components.
•
Do not place heavy objects on top of the
MX2406RM
. If the
MX2406RM
is to a table or
wall, use only an ALTINEX made mounting
accessories like rack mount shelf
DA1298RM
or
rack mount ears
DA1299RM
and cables for
optimum setup.
•
To turn off the main power, be sure to remove
the cord from the power outlet. The power outlet
socket should be installed as near to the
equipment as possible, and should be easily
accessible.
•
Do not pull the power cord or any cable that is
attached to the
MX2406RM
Switcher.
•
If the
MX2406RM
Switcher is not to be used for
an extended period of time, disconnect the
power cord from the power outlet.
1.4 CLEANING
•
Unplug the
MX2406RM
power cord before
cleaning. Clean surfaces with a dry cloth. Never
use strong detergents or solvents such as
alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
1.5 FCC / CE NOTICE
•
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including that
may cause undesired operation.
•
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
•
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.