Filter
Top Products
SWITCHER
400-0378-004
3
ABOUT YOUR SW1956CT 2
SW1956CT
2-In, 1 Out Twisted Pair Auto-Switcher
The SW1956CT is a 2-In, 1-Out Twisted Pair
Auto-Switcher. The SW1956CT switches
automatically upon signal detection, but may also
be controlled manually. The SW1956CT is
designed to switch ALTINEX Twisted Pair
transmitter and receiver signals. These include
ALTINEX part numbers DA1930CT, DA1931CT,
MT103-122, MT103-123, etc.
The unit is encased in a solid metal enclosure and
ships with an external, 9V power adapter. Also
included is an external contact-closure switch for
manual override of input selection.
Manual override switching is made via a contact
closure on the Input Select jack. This switch may
be used for manual control, or the contact closure
may be controlled from a control system.
The SW1956CT is perfect for applications that use
wall or floor plates for auto-switching. The
SW1956CT may be mounted to furniture or other
suitable surfaces using optional hardware.
The latest generation of Twisted Pair devices uses
an innovative, patented technology* developed by
ALTINEX. The new signal processing technology
allows transmitting and receiving fully equalized
computer video signals, stereo, and audio signals
over long distances.
TECHNICAL SPECIFICATIONS 3
Specifications are subject to change.
See www.altinex.com for up-to-date information.
FEATURES/
DESCRIPTION
SW1956CT
Inputs
Input Connector RJ-45 female (2)
Power 2.5mm DC jack (1)
Outputs
Output Connector RJ-45 female (1)
Compatibility
Signal Types
ALTINEX Standard for
Twisted Pair
Video Signal
Resolutions
VGA through UXGA,
480p through 1080i
Recommended Max.
Cable Lengths
Note: Measurements
made using ALTINEX
low-skew cable,
CB3150PV.
VGA: 640x480@60Hz
900 ft (274 m)
XGA: 1024x768@60Hz
700 ft (213 m)
SXGA: 1280x1024@60Hz
650 ft (198 m)
UXGA: 1600x1200@60Hz
600 ft (183 m)
Accessories Included
Power Adapter +9 VDC, 500 mA
Remote Switch Contact Closure
Table 1. SW1956CT General
* US Patent 7,065,190