Filter
Top Products
32 Operation
Chapter 3 - Using the Web Configuration Server
7 In the VLAN Editor, enter the follwing for data:
VLAN ID: 200 (an arbitrary selection-a VLAN ID is required for defining the
untagged data. This VLAN tag is only used internally in the unit)
VLAN NAME: Data
VLAN Priority: 0
WAN: Yes
LAN: No
8 Click OK to add the VLAN to the Tagged Port Membership table.
9 Enter the VLAN ID for untagged data (200) in the fields Untagged VLAN ID on
LAN port and click Save.
10 Restart the unit to apply the changes.
3.6.5 VLAN Configuration Example 2
This example describes how to define the following configuration:
Two daisy-chained Voice Gateways: VG-1 and VG-2.
VLAN ID 100, VLAN Priority 7 for Voice (call signaling, RTP and RTCP) and
Management packets on the WAN port.
VLAN ID 200, VLAN Priority 4 for data on WAN port (VG-1)
No VLAN for data on the LAN port (VG-2).