AMD 2600 Computer Hardware User Manual


 
10
4 When the New Hardware Found Wizard appears, at the appropriate
prompt insert the installation CD to load the drivers for the graphics
card.
Once the drivers and software have been installed, configure the
display.
Configure the display
1 Navigate to the Control Panel and choose Display, or right-click on
the desktop and choose
Properties.
2 Choose the Settings tab and select the screen resolution and color
depth that best suit your requirements and your display’s
performance.
3 Click Advanced and then select the Monitor tab.
4 Choose a refresh rate from the drop-down list.
Caution! Choosing a refresh rate unsupported by your display may
damage your display. Consult your display’s documentation if
necessary.
5 Click OK to return to the desktop.
Once you have configured the main display you can configure any
other displays that are connected.
6 To configure another display, do the following:
a) From the
Start menu click Control Panel, and then click
Display.
b) To access the basic multi-monitor configuration settings, click
the
Settings tab .
c) Select the
Monitor icon identified by the number 2.
d) Click
Extend my Windows desktop onto this monitor.
e) Set the
Screen Resolution and Color Quality as appropriate
for the second monitor. Click
Apply or OK to apply these new
values.
Note: When using multiple monitors with the graphics card, one
monitor will always be the
Primary display. Any additional monitors
will be designated as
Secondary.
Note: You can also enable and configure multiple monitors using the
ATI Catalyst™ Control Center.