AMD 27493 Computer Hardware User Manual


 
Chapter 8 Electrical Data 29
26237C—May 2003 AMD Athlon™ XP Processor Model 10 Data Sheet
Preliminary Information
8 Electrical Data
This chapter describes the electrical characteristics that apply
to all desktop AMD Athlon™ XP processors model 10.
8.1 Conventions
The conventions used in this chapter are as follows:
Current specified as being sourced by the processor is
negative.
Current specified as being sunk by the processor is positive.
8.2 Interface Signal Groupings
The electrical data in this chapter is presented separately for
each signal group.
Table 9 defines each group and the signals contained in each
group.
Table 9. Interface Signal Groupings
Signal Group Signals Notes
Power
VID[4:0], VCCA, V
CC_CORE
, COREFB,
COREFB#
See “Voltage Identification (VID[4:0])” on page 30,
“VID[4:0] Pins” on page 77, “VCCA AC and DC
Characteristics” on page 31, “V
CC_CORE
Characteristics”
on page 32, “VCCA Pin” on page 77, and “COREFB and
COREFB# Pins” on page 73.
Frequency FID[3:0]
See “Frequency Identification (FID[3:0])” on page 31 and
“FID[3:0] Pins” on page 74.
System Clocks
SYSCLK, SYSCLK# (Tied to CLKIN/CLKIN#
and RSTCLK/RSTCLK#), PLLBYPASSCLK#,
PLLBYPASSCLK
See Table 15, “SYSCLK and SYSCLK# DC Characteristics,”
on page 35, Table 2, “Advanced 333 FSB SYSCLK and
SYSCLK# AC Characteristics,” on page 22, Table 6,
“Advanced 400 FSB SYSCLK and SYSCLK# AC
Characteristics,” on page 26, “SYSCLK and SYSCLK#” on
page 77, and “PLL Bypass and Test Pins” on page 76.