AMD N2PA-LITE Computer Hardware User Manual


 
12
2-5-4 AGP Slot
The motherboard provides an AGP Slot, supporting the 4X/8X AGP VGA card.
AGP SLOT
2-6 Connectors, Headers
2-6-1 Connectors
(1) Power Connector (20-pin block) : PWR
ATX power supply connector. This is a newly defined 20-pins connector that usually
comes with ATX case. The ATX power supply allows the use of soft power on
momentary switch that connects from the front panel switch to 2-pins power-on
jumper pole on the motherboard. When the power switch on the back of the ATX
power supply is switched on, the full power will not come into the system board until
the front panel switch is momentarily pressed. Press this switch again will turn off the
power to the system board.
PIN ROW2 ROW1
1 3.3V 3.3V
2 -12V 3.3V
3 GND GND
4 Soft Power On 5V
5 GND GND
6 GND 5V
7 GND GND
8 -5V Power OK
9 +5V +5V (for Soft Logic)
10 +5V +12V
Pin 1
(2) PS/2 Mouse & PS/2 Keyboard Connector: KYB
The connectors for PS/2 keyboard and PS/2 mouse.
(3) USB Port connector: USB
The connectors are 4-pin connector that connect USB devices to the system board.
(4) LAN Port connector: LAN (for N2PAP-LITE only)
This is a standard RJ45 connector for network connection