American Audio WM-16HH Mouse User Manual


 
Every WM-16HH™ and WM-16LAV™ has been
thoroughly tested and has been shipped in per-
fect operating condition. Carefully check the
shipping carton for damage that may have oc-
curred during shipping. If the carton appears
to be damaged, carefully inspect your wire-
less microphone for any damage and be sure
all equipment necessary to operate the wire-
less microphone has arrived intact. In the event
damage has been found or parts are missing,
please contact our toll free customer support
number for further instructions. Please do not
return the wireless microphone to your dealer
without rst contacting customer support.
©American Audio® - www.americanaudio.com - WM-16™ Instruction Manual Page 3
WARRANTY INFORMATION
The WM-16HH™ and WM-16LAV™ carries
a ONE year (365 days) limited warranty. This
warranty covers parts and labor. Please fill out
the enclosed warranty card to validate your
purchase and warranty. All returned service
items whether under warranty or not, must be
freight pre-paid and accompany a return autho-
rization (R.A.) number. If the unit is under war-
ranty, you must provide a copy of your proof
of purchase invoice. Please contact American
Audio® customer support at (800) 322-6337 for
a R.A. number.
WM-16™ PRODUCT INFORMATION
The serial and model number for this unit is
located on the rear panel. Please write down
the numbers here and retain for future refer-
ence.
Model No._____________________________
Serial No._____________________________
Purchase Notes:
Date of Purchase_______________________
Dealer Name__________________________
Dealer Address_________________________
_____________________________________
_____________________________________
Dealer Phone__________________________
I. Heat - The receiver should be situated away
from heat sources such as radiators, heat reg-
isters, stoves, or other appliances (including
amplifiers) that produce heat.
2. Do not let insecticides, benzene, or thinner
come in contact with the surface of the unit.
3. Never disassemble or modify your unit in
any way, doing so will void your manufactures
warranty.
4. Never plug this unit in to a dimmer pack
5. Do not attempt to operate this unit if it
becomes damaged in any way.
6. This unit is intended for indoor use only, use
of this product outdoors voids all warranties.
7. Always mount this unit in safe and stable
matter.
8.
Disconnect from main power before making
any type of connection.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
WATER OR MOISTURE
NOTE: This product satisfies FCC regulations
when shielded cables and connectors are
used to connect the unit to other equipment.
To prevent electromagnetic interference with
electrical appliances such as radios and tele-
visions, use shielded cables and connectors
for connections.