Filter
Top Products
MEGAPOWER CPU 8200-0421-02, REV. E
OPERATOR’S GUIDE
20 of 21
Appendix E: Auxiliary Key Code Functions
The following special function keys enable you, using the keyboard, to manually operate and control cameras.
F1 Special Function Keys
Function Action
F1
Releases keyboard control of video trunk
1-F1
Unlocks the current camera
2-F1
Locks the current camera
4-F1
Take snapshot of currently selected
monitor and store on a remote IP server
19-F1
Flip Camera 180°
21-F1
Run Pattern 1
22-F1
Run Pattern 2
23-F1
Run Pattern 3
29-F1
Ping Dome
(1)
30-F1
Reset Dome
31-F1
Go to start of Pattern 1
(1)
32-F1
Go to start of Pattern 2
(1)
33-F1
Go to start of Pattern 3
(1)
Function Action
41-F1
Auto Repeat Pattern 1
42-F1
Auto Repeat Pattern 2
43-F1
Auto Repeat Pattern 3
44-F1
Run Apple Peel Pattern
(1)
69-F1
Return to Auto Iris/Auto Focus
70-F1
Set Aux 4 Off
71-F1
Set Aux 4 On
99-F1
Logoff from passcode Logon
Note:
(1)
For SensorNet and RS-422 domes connected via Direct
Connection only.
F2 Special Function Keys
Function Action
1-F2
Sets on-screen Time and Date display ON
2-F2
Sets on-screen Time and Date display OFF
3-F2
Sets Camera Title, Number, & Status
display ON
4-F2
Sets Camera Title, Number, & Status
display OFF
5-F2
Displays titles & date/time at the top of the
screen
6-F2
Displays titles & date/time at the bottom of
the screen
7-F2
Sets on-screen Time, Date, & Title display
ON
8-F2
Sets on screen Time, Date, & Title display
OFF
21-F2
Sets date format to month-day-year (MM-
DD-YY)
22-F2
Sets date format to day-month-year (DD-
MM-YY)
23-F2
Sets date format to year-month-day (YY-
MM-DD)
24-F2
Steps through date formats
Function Action
38-F2
Enter/Exit Line Lock phase adjustment
mode
39-F2
Enter/Exit Line Lock phase adjustment
mode (same as 38-F2)
41-F2
Sets date format to month-day-year (MM-
DD-YY)
42-F2
Sets date format to day-month-year (DD-
MM-YY)
43-F2
Sets date format to year-month-day (YY-
MM-DD)
44-F2
Steps through date formats
45-F2
Disables bell at keyboard for all RS-232
ports
46-F2
Enables bell at keyboard for all RS-232
ports
47-F2
Disables bell signal transmissions to
selected keyboard
48-F2
Enables bell signal transmissions to
selected keyboard