Filter
Top Products
Page 5
Printed in China.
© 2003-2008 American Innovative, LLC.
Power Cord Protection
Power cords should be routed so that they are not likely to be walked on or pinched by items
placed on or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
Lightning
If the unit is not plugged into an appropriately rated surge protector, unplug the unit from the
wall in the event of a lightning storm in order to protect it from powerline surges. Unplug the
unit if it is to be unused for a long period of time.
Object & Liquid Entry
Never insert objects of any kind into this product, through ventilation openings, as these
objects may touch dangerous voltage points or create a short circuit that could result in a fire
or electric shock. Never spill liquid of any kind on or into the device.
Cleaning
Unplug the unit from the wall before cleaning. Use a soft, damp cloth to wipe down the unit.
Do not use liquid, aerosol or abrasive cleaners.
Servicing & Safety Checks
Do not attempt to service the unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. All servicing should be referred to qualified personnel.
Servicing is required when the unit does not operate properly or has been damaged in any
way, including but not limited to power supply/cord damage, damage as a result of exposure
to moisture, and damage resulting from impact. Upon completion of any service or repairs to
this product, ask the service technician to perform routine safety checks.
Damage Requiring Service
This product should be fixed by qualified service personnel under the following conditions:
1. When the power supply, cord or plug has been damaged.
2. If liquid has been spilled, or objects have fallen into the unit.
3. If the unit is exposed to rain or water.
4. If the product does not operate normally when following the operating instructions.
5. If the unit has been dropped or damaged in any way.
6. When the product exhibits a distinct change in performance.
Replacement Parts
In the event that replacement parts are required, ensure that the service technician uses parts
specified by the manufacturer or those deemed to be equivalent. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
Lead Paint
This product has been tested for lead paint content and has passed all related tests as defined
by the ASTM F963-07 sec. 4.3.5.1 safety specification.