Filter
Top Products
1
Introduction
The APC Smart-UPS® RT is a high-performance, uninterruptible power supply (UPS) that provides
protection for electronic equipment from utility power blackouts, brownouts, sags and surges. The
UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances
by internally disconnecting from utility line power. The UPS provides continuous power from the
internal battery until utility power returns to safe levels or the battery is fully discharged.
INSTALLATION
Read the Safety Instruction sheet before installing the UPS.
Unpacking
Inspect the UPS upon receipt. Notify the carrier
and dealer if there is damage.
The packaging is recyclable; save it for reuse or
dispose of it properly.
Check the package contents.
UPS
Front bezel
Literature kit containing:
Software CD
Smart-UPS User Manuals CD
Serial cable
Six output power cords
Two battery cable assemblies
Two ground wires
Product documentation, warranty
information, and safety information
Network Management Card
documentation
Specifications
TEMPERATURE
OPERATING
S
TORAGE
32° to 104° F (0° to 40° C)
5° to 113° F (-15 to 45 ° C) charge UPS battery every six months
MAXIMUM
ELEVATION
OPERATING
S
TORAGE
10,000 ft (3,000 m)
50,000 ft (15,000 m)
HUMIDITY 0% to 95% relative humidity, non-condensing
This unit is intended for
indoor use only. Select a
location sturdy enough to
handle the weight.
Do not operate the UPS where
there is excessive dust or the
temperature and humidity are
outside the specified limits.
Ensure the air vents on the
front and rear of the UPS
are not blocked.
WEIGHT
UPS
UPS
WITH
PACKAGING
244 lbs (111 kg)
284 lbs (129 kg)