Filter
Top Products
PDU: User’s Manual 1
Product Descriptions and Safety Information
Features of
single-branch
PDU models
This manual explains how to install and use the following
Rack-mount PDUs:
All the PDUs distribute input power from a single source to the
PDU outlets for use by connected equipment and provide
current-sensing to guard against overload conditions.
Safety
information
PDU Voltage
Number of
Outlets
Outlet Type
AP7620
100
–
120
VA C 2 4
NEMA
5
-
20R
AP7622
200
–
240
VA C 6
NEMA
L6
-
20R
AP7621
AP7626
200
–
240
VA C 2 5
21 outlets of type
IEC 320
C13
4
outlets of type
IEC 320
C19
Note
In all applications, the plug on the power supply
cord is the means to disconnect the
PDU
. The
receptacle (outlet) into which the
PDU
is plugged
must be installed near the connected equipment
and must be easily accessible.
In
208
and
230
VA C
applications, the
PDU
relies
on the building installation for over-current and
short-circuit current protection.
You must connect the
PDU
to a branch circuit
that is rated as follows:
•
20
amps,
250
volts (in accordance with
NFPA
70
) in
208
VA C
applications.
•
16
amps,
250
volts in
230
VA C
applications.