Filter
Top Products
Installation and Quick Start 13
Quick Configuration
3. When the Management Card reboots, the BOOTP server
provides it with the TCP/IP settings.
– If you specified a bootup file name, the Management
Card attempts to transfer that file from the BOOTP
server using TFTP or FTP. The Management Card
assumes all settings specified in the bootup file.
– If you did not specify a bootup file name, the
Management Card can be configured remotely by
using the control console or the Web interface: user
name and password are both apc, by default.
Note
For the MAC address, look on the bottom of
the Management Card or on the Quality
Assurance slip included in the package.
See als
o
To create a bootup file, see your BOOTP
server documentation.