Filter
Top Products
Installation and Quick Start 11
Quick Configuration
APC
Management
Card Wizard
You can use the APC Management Card Wizard (if it is
supported for the firmware release you are using) at a
Windows
®
98, Windows NT
®
4.0, Windows 2000, or
Windows XP computer to configure a Management Card. Not
all releases support the wizard.
1. Insert the APC Network Management Card utility CD
into a computer on your network.
2. Launch the Management Card Wizard, when prompted,
or, if prompted to restart the computer, access the Wizard
from the Start menu after the computer has restarted.
3. Wait for the Wizard to discover the unconfigured
Management Card, then follow the on-screen
instructions.
See als
o
To configure multiple Management Cards, or to
configure a Management Card, see the Network
Management Card User’s Guide on the Utility
CD.
Note
If you leave the Start a Web browser when
finished option enabled, you can use apc for both
the user name and password to access the
Management Card through your browser.