Filter
Top Products
Page 4 of 20 Text artwork 990-9030 Rev. A. Equipment Handbook for the Low Voltage Disconnectors series
SECTION 1: SAFETY INSTRUCTIONS
1 Before using the units, carry out the following:
1.1 READ AND FOLLOW THE SAFETY INSTRUCTIONS.
1.2 IF A FAULT IS FOUND WHEN IN USE, DO NOT PROCEED FURTHER WITHOUT CLEARING
THE FAULT.
1.3 CHECK THE UNIT VOLTAGE AND POLARITY AGAINST THE VALUE GIVEN IN THE
INSTALLATION INSTRUCTIONS, SECTION 5.
1.4 BECOME FAMILIAR WITH THE HAZARDS ASSOCIATED WITH THE UNITS.
WARNING
THESE UNITS CONTAIN THE FOLLOWING HAZARDS:
ELECTRICAL VOLTAGE
ENERGY
WEIGHT
ONLY COMPETENT PERSONS MAY WORK ON THESE UNITS.
IT IS IMPERATIVE THAT ONLY SKILLED SERVICE PERSONNEL BE
ALLOWED TO INSTALL AND/OR REMOVE THE PROTECTIVE COVERS FOR
SERVICING OR OTHER PURPOSES.
THE UNITS CONTAIN POTENTIALLY LETHAL VOLTAGES AND SOURCES
OF HIGH ENERGY.
REFER TO MANUAL HANDLING, SECTION 8, BEFORE ATTEMPTING TO
LIFT OR MOVE THE UNITS.
REFER TO THE FOLLOWING DOCUMENTS BEFORE COMMENCING WORK.
ALL WORK MUST BE CARRIED OUT IN ACCORDANCE WITH THE
INSTRUCTIONS THEREIN:
- MANUFACTURER'S INSTRUCTIONS
- HEALTH AND SAFETY AT WORK ACT, 1974
- ELECTRICITY AT WORK ACT, 1989
- CONTROL OF SUBSTANCES HAZARDOUS TO
HEALTH (COSHH) REGULATIONS
- MANUAL HANDLING REGULATIONS.